When a flood or rainy season like this, sometimes we accidentally dropped the phone so that the phone vulnerable penetration of water. Even worse, the phone submerged in the water.
If you have this, you may have to replace it with a new one. But if you move quickly and lucky enough, chances are your phone can still be saved!
Well, what to do if the phone already exposed to water? Try to follow the steps below first aid. Incidentally Liputan6.com ever experienced team and phones were rescued.
1. Remove the phone from the water as soon as possible
Once the phone fell or exposed to water, immediately remove it from the water. Turn off its power to prevent shorting. Although the phone casing looks meetings, EIT no mistake .. water could get into the phone in just a few seconds.
2. Dry the phone, remove the casing and battery
Do not wait too long, the phone dry immediately with a soft cloth that absorbs water. At least not to remove the water on the outside of the phone first. Then remove the casing and the battery of the phone. Avoid moving the phone too much while it is drying so that the water that is in the phone will not spread through the circuit. Do not forget to remove the sim card and phone memory card.
Use a small vacuum cleaner if there is to dry and suck the moisture on the inside of the phone. Navigate to the inside of the phone for about 20 minutes. Do not point the vacuum cleaner too close to the phone because it can generate static electricity that could harm your phone.
To determine whether cell phones really take in water, most phones usually have indicator located near the battery. If the BlackBerry, the indicator located at the upper left corner near the battery, in the form of a small white box. Well, if this box changes color to pink or red, it means that the phone has the penetration of water.
Note: Do not use a hair dryer to dry the phone even though the mode 'cold'. Therefore, the blow dryer can actually push moisture into crevices mobile component so that it can happen corrosion and oxidation and eventually damage the phone. Remember: Do not turn on the phone after drying, letting it settle.
3. Store in a water absorbent material
Believe it or not, the rice is believed to absorb the remaining moisture on the inside of the phone. So there is no harm in trying. Keep the phone in rice during the night.
If there were, it would be better again you use silica gell instead because it can absorb moisture better than rice. Enter your mobile phone into an airtight container together with silica gel. To be more effective, rotate the phone every few that remains of the humidity can be absorbed.
4. After one more day left in place, try to turn the phone
Before switching on, make sure that the phone is completely dry. Install the battery, then try to turn it on and see if the phone can be turned on. If you still can not turn on, remove the battery and plug the phone into the charger. If it turns on, most likely your battery is damaged.
5. If you're still dead, take it to a technician section
If the phone was still not lit, try to take it to an authorized dealer or technician phones. Do not try to hide the fact that your phone does get wet so they know what to do.
Be careful when carrying the phone. Never take him to the toilet or the beach. Do not let lying on the dining table or a place that may be exposed to water because it has a lot of water and doused the phone incident ended with the death of the phone.
If you have this, you may have to replace it with a new one. But if you move quickly and lucky enough, chances are your phone can still be saved!
Well, what to do if the phone already exposed to water? Try to follow the steps below first aid. Incidentally Liputan6.com ever experienced team and phones were rescued.
1. Remove the phone from the water as soon as possible
Once the phone fell or exposed to water, immediately remove it from the water. Turn off its power to prevent shorting. Although the phone casing looks meetings, EIT no mistake .. water could get into the phone in just a few seconds.
2. Dry the phone, remove the casing and battery
Do not wait too long, the phone dry immediately with a soft cloth that absorbs water. At least not to remove the water on the outside of the phone first. Then remove the casing and the battery of the phone. Avoid moving the phone too much while it is drying so that the water that is in the phone will not spread through the circuit. Do not forget to remove the sim card and phone memory card.
Use a small vacuum cleaner if there is to dry and suck the moisture on the inside of the phone. Navigate to the inside of the phone for about 20 minutes. Do not point the vacuum cleaner too close to the phone because it can generate static electricity that could harm your phone.
To determine whether cell phones really take in water, most phones usually have indicator located near the battery. If the BlackBerry, the indicator located at the upper left corner near the battery, in the form of a small white box. Well, if this box changes color to pink or red, it means that the phone has the penetration of water.
Note: Do not use a hair dryer to dry the phone even though the mode 'cold'. Therefore, the blow dryer can actually push moisture into crevices mobile component so that it can happen corrosion and oxidation and eventually damage the phone. Remember: Do not turn on the phone after drying, letting it settle.
3. Store in a water absorbent material
Believe it or not, the rice is believed to absorb the remaining moisture on the inside of the phone. So there is no harm in trying. Keep the phone in rice during the night.
If there were, it would be better again you use silica gell instead because it can absorb moisture better than rice. Enter your mobile phone into an airtight container together with silica gel. To be more effective, rotate the phone every few that remains of the humidity can be absorbed.
4. After one more day left in place, try to turn the phone
Before switching on, make sure that the phone is completely dry. Install the battery, then try to turn it on and see if the phone can be turned on. If you still can not turn on, remove the battery and plug the phone into the charger. If it turns on, most likely your battery is damaged.
5. If you're still dead, take it to a technician section
If the phone was still not lit, try to take it to an authorized dealer or technician phones. Do not try to hide the fact that your phone does get wet so they know what to do.
Be careful when carrying the phone. Never take him to the toilet or the beach. Do not let lying on the dining table or a place that may be exposed to water because it has a lot of water and doused the phone incident ended with the death of the phone.
0 Comments